With the help of a second person, lift the dashboard up and out through the passenger door. Pro-Tips for Reassembly
Remove the plastic trim surrounding the dials. Undo the two Torx screws holding the instrument cluster in place. Tilt it forward, unplug the blue and green connectors from the back, and set the unit aside. Step 4: Glovebox and Lower Dash
Pull the three rotary knobs off. Remove the screws behind them to loose the heater control panel. You do not necessarily need to disconnect the cables; you can often push the unit back into the dash cavity. vw polo 6n dashboard removal updated
Open the glovebox and remove the screws along the top and bottom edges. Pull the unit out.
Look through the radio or glovebox cavity for any metal straps or brackets bolted to the transmission tunnel or the cross-member bar. Step 6: The Final Pull With the help of a second person, lift
Reconnect the instrument cluster and battery to test all lights and switches before putting all the trim back on. If you'd like more specific help, tell me:
Remove the screws located near the footwells and under the ashtray. Lift the gear gaiter and remove the surrounding trim to access hidden bolts. Pull the console back toward the rear seats. Step 3: Removing the Instrument Cluster and Switches Tilt it forward, unplug the blue and green
Remove the screws from the underside of the steering column plastic and pull the top and bottom halves apart.
Disconnect the battery. Since you will be working near the airbag system, wait at least 30 minutes after disconnecting the negative terminal to allow the capacitors to discharge. Step 2: Removing Peripheral Components