An ESD (Electrostatic Discharge) wrist strap is mandatory. The SSP0117RPC contains sensitive CMOS components.
Once the hardware is seated, you must "introduce" the SSP0117RPC to your network.
Connect the primary power lead. Ensure the voltage toggle (if present) matches your local grid (110V vs. 220V). ssp0117rpc install
Apply firm, even pressure until you feel the module click into place. Do not force it; if there is resistance, check for obstructions in the rail.
Download the latest driver package or configuration utility from the manufacturer’s portal. An ESD (Electrostatic Discharge) wrist strap is mandatory
By default, many RPC modules ship with a static IP (often 192.168.1.100 or similar). Set your laptop to the same subnet and access the web-based GUI.
The "RPC" (Remote Power Control) functionality usually requires a connection via an RJ45 or RS-232 serial port. Connect this to your management switch or controller. Connect the primary power lead
If your system does not support hot-swapping, shut down the main power source and unplug the unit.
Turn on the power. Watch the LED indicators. A steady green "Status" light usually indicates the hardware check passed.