Encountering an error while flashing firmware on a MediaTek (MTK) device is a common issue for Android customizers and technicians. Among the most frustrating is the . This error usually manifests with a message like: BROM ERROR: S_FT_DA_NO_RESPONSE (1042) .
Try selecting MTK_AllInOne_DA_SP.bin or a specialized DA file if provided with your firmware [3]. 4. Correct Preloader Usage
SP Flash Tool Error 1042 Verified: Causes, Solutions, and Expert Fixes sp+flash+tool+error+1042+verified
(e.g., stock firmware, custom ROM)?
Newer phone models require newer versions of the SP Flash Tool. Try upgrading or downgrading to a stable version (e.g., v5.15xx or higher) [3]. Frequently Asked Questions (FAQ) What is the difference between Error 1042 and 1013? is usually a connection/driver issue (BROM) [1]. Encountering an error while flashing firmware on a
Open Device Manager on Windows and check if the device appears as MediaTek PreLoader USB VCOM (Android) without a yellow exclamation mark [2]. 3. Change the Download Agent (DA) File
The SP Flash Tool is not using the correct DA file for your specific chipset [3]. Try selecting MTK_AllInOne_DA_SP
If the phone has a removable battery: Take it out, plug the USB cable, then reinsert the battery immediately [2].
A small piece of read-only code in the CPU that runs when the phone is first powered on, before any software loads.
Your computer cannot properly communicate with the phone in its preloader/BROM mode [2].