Rkdevtool No Devices Found: __hot__

You may need to restart Windows in "Disable Driver Signature Enforcement" mode.

RKDevTool does not recognize devices in "Normal" booted mode. Your device must be in or Loader mode to be detected.

How to Fix "RKDevTool No Devices Found" (Step-by-Step Guide) rkdevtool no devices found

Hold the recovery button -> Plug in the USB OTG cable -> Plug in the DC power. Summary Checklist Did you install DriverAssistant ? Is the device in Maskrom/Loader mode? Are you using a USB 2.0 port? Is the cable a high-quality data cable ?

Connect the device directly to your motherboard’s rear I/O (if using a PC) rather than a front-panel port or a USB hub. 4. Windows Driver Signature Enforcement You may need to restart Windows in "Disable

Windows 10 and 11 sometimes block the Rockchip driver because it lacks a modern digital signature.

Try connecting the in addition to the USB cable. How to Fix "RKDevTool No Devices Found" (Step-by-Step

Most devices have a physical "Recovery" or "Boot" button. Hold the button down while the device is powered off.

Restart your PC. This ensures the Rockusb driver is properly bound to your USB ports. 3. Check the USB Cable and Port

If you see "Unknown Device" or "Class for Rockchip Devices" with a yellow exclamation mark, the driver is the problem.