Pdf Iso -16276-1 -

ISO 16276-1: The Standard for Pull-Off Testing in Corrosion Protection

: Users should note that pull-off testing is a destructive process . Areas tested will require repair once the test is completed, the extent of which depends on the project specification. 2. The Pull-Off Testing Procedure

: The coating and the face of the test cylinder ( dolly ) are cleaned and degreased. pdf iso -16276-1

: It traditionally applies to steel substrates with a thickness of at least 10 mm . However, the updated ISO 16276-1:2025 edition expands this scope to include substrates as thin as 3 mm .

: The force at fracture is recorded (typically in Megapascals, MPa), and the nature of the failure (adhesive vs. cohesive) is assessed visually. ISO 16276-1: The Standard for Pull-Off Testing in

This standard provides a rigorous, standardized methodology for measuring the of protective coatings—a term that encompasses both adhesion (bond to the substrate) and cohesion (internal strength of the coating). 1. Scope and Application

: The procedures are applicable to coatings of any thickness . The Pull-Off Testing Procedure : The coating and

The standard, officially titled "Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 1: Pull-off testing" , is a critical benchmark for quality control in industrial coating applications.

The core of the standard is the , which measures the force required to detach a coating from its substrate. Core Steps in Testing :