Click and select the .bin or .hfs file from your download. Verify that the file name matches your model (HDS2102S). Click Update .
Change your USB port (use a rear port if on a desktop) or try a different USB-C cable. owon hds2102s firmware update verified
Open the Owon Update software on your PC. It should display "Device Connected" in the status bar. 4. Load and Flash Click and select the
Unzip the downloaded folder and locate the driver installer. Run the setup as an administrator. This ensures your PC recognizes the oscilloscope when it enters "Update Mode." 2. Connect in Update Mode Change your USB port (use a rear port
Updating the firmware on your Owon HDS2102S handheld oscilloscope is the best way to eliminate software bugs, improve waveform refresh rates, and ensure your signal generator functions remain stable. Because a failed flash can brick your device, using a verified process is essential.
Power off your Owon HDS2102S. Connect it to your PC via USB-C. While the device is off, hold down the (or the specific key combo indicated in your download readme) and press the Power button . The screen may remain dark or show a bootloader message. 3. Run the Update Utility
Use a high-quality data cable (the one included in the box is preferred).