If the motor is not rotating, the radar cannot generate the azimuth (AZI) pulses needed for synchronization. This can be caused by worn-out motor brushes or a failing scanner motor.
A failing magnetron or defective modulator circuit board may stop transmitting signals entirely. Additionally, moisture entry due to a damaged O-ring can cause corrosion on internal computer boards. Step-by-Step Troubleshooting Guide 1. Initial System Check JRC радар. - Мореход no sync signal jrc radar
Even a momentary drop in shipboard power can cause the radar to lose sync or restart. Insufficient power is a leading reason for scanners failing to rotate or transmit. If the motor is not rotating, the radar