Once the engine "pops" or fires briefly, move the choke to the run position and pull again to start. 5. Maintenance and Troubleshooting To keep your Alpina IT 31015
Hold the machine firmly on the ground. Pull the starter rope slowly until you feel resistance, then give it a sharp, quick tug.
The refers to a petrol-powered chainsaw manufactured by the Italian brand Alpina (specifically from the Conegliano, Italy era). While this specific numeric code is often found on the air filter cover or identification plate of vintage and older models, the "manual" for this machine typically follows the standard operating procedures for Alpina's 2-stroke petrol engines. 1. Product Overview and Identification Alpina IT 31015 Manual Alpina It 31015
Move the choke lever to the "Start" or "Closed" position.
Switch the engine stop switch to the "I" (On) position. Once the engine "pops" or fires briefly, move
Check for carbon buildup and ensure the gap is set correctly (typically around 0.5mm to 0.6mm).
Never cut with the tip of the bar; this is the primary cause of dangerous kickback. 3. Fuel and Lubrication As a 2-stroke machine, the requires a precise mixture of gasoline and oil: Pull the starter rope slowly until you feel
is a classic petrol engine chainsaw designed for domestic and light professional gardening tasks. 2-stroke petrol engine. Origin: Manufactured in Conegliano, Italy.
The front hand guard acts as a manual and inertial chain brake. Ensure it is disengaged (pulled back toward the handle) before attempting to start the engine.
Press the primer bulb 7–10 times until fuel is visible in the lines.