Place the LNL-3300-M5 onto the mounting standoffs within the M5 enclosure. Secure it using the provided screws. Ensure there is adequate clearance for wiring and that the board does not touch the metal sides of the box. Step B: Wiring the Power
If the database fails to download, perform a memory clear using DIP switch 8 and try again. lenel lnl3300m5 installation manual upd top
Use a dedicated, battery-backed power supply to ensure the controller remains operational during local power outages. Step C: Network and Serial Connectivity Place the LNL-3300-M5 onto the mounting standoffs within
The LNL-3300-M5 is designed to fit the footprint of the legacy M5 / Micro5 controller. Verify that the standoffs in the existing enclosure are secure. Step B: Wiring the Power If the database
Connect the power source to the power input terminals (Vin and GND).
Connect the existing M5 reader interface boards to the RS-485 ports (Port 1 and Port 2). Ensure proper termination if the LNL-3300-M5 is at the end of the communication line. 4. Configuring DIP Switches