: The unit should be located in the radio stack where it is easily accessible to the pilot.
Following the manual’s checklist is critical for FAA Part 43 compliance.
The KT 70 is designed for standard panel mounting within the Silver Crown Plus product line. Specification 11.0 to 33.0 VDC (Compatible with 14V and 28V systems) Current Draw 35 Watts maximum Output Power 200 Watts peak pulse minimum Weight 3.90 lbs (1.77 kg) Dimensions 1.63" H x 6.25" W x 10.0" L Certification TSO C112 (Mode S) 🏗️ Mounting and Wiring Kt 70 Installation Manual
The installation manual provides detailed pinout diagrams for the primary rear connector. Key wiring tasks include:
: Connection to other high-power RF equipment (like DME) to prevent interference. : The unit should be located in the
: Must be connected to a compatible blind encoder (like the KEA 130A) or an encoding altimeter via a Parallel Gray Code (Gillham) interface.
: The manual describes how to set the specific aircraft address using a dedicated programming module or hard-wiring specific pins. Specification 11
: The unit slides into a tray and is secured with a locking screw on the front bezel. Electrical Interconnect
Proper installation requires a dedicated mounting rack and specialized connectors. Mechanical Installation