Jbl N7000 Schematic -

Uses an inductor in series with the signal to roll off frequencies above 7 kHz for the midrange/woofer (like the JBL 375 driver).

The JBL N7000 is a classic frequency-dividing network designed specifically to integrate ultra-high-frequency (UHF) drivers, such as the JBL 075 tweeter , into high-fidelity loudspeaker systems. Whether you are restoring a vintage JBL Olympus or adding "brilliance" to a custom build, understanding the schematic is essential for maintaining original performance.

The network contains two capacitors and two inductors . jbl n7000 schematic

The N7000 was originally intended to bridge the gap between a 2-way system and a UHF driver to create a 3-way setup. LANSING HERITAGEhttps://www.audioheritage.org

Uses a capacitor in series with the signal to protect the tweeter from high currents below 7 kHz. Uses an inductor in series with the signal

Thread: Rebuilding a JBL N7000. Possible? - LANSING HERITAGE

Most units feature a continuously variable ALPS level control or L-pad to adjust the tweeter output to match the room acoustics. Specifications and Compatibility The network contains two capacitors and two inductors

The N7000 circuit is relatively simple, consisting of two "cells" designed to provide a 12 dB per octave rolloff on each side of the crossover point. Typically set at 7,000 Hz .