Ivoclar Programat P100 Manual English !!link!! Official

To ensure safe and optimal operation, follow these installation guidelines:

Turn on the power switch at the rear. The furnace performs a self-test before displaying the standby screen. Program Selection: Enter the desired Program Number ( ) using the keypad. Press START ( ivoclar programat p100 manual english

or 62) to begin the firing cycle once the furnace reaches the standby temperature ( To ensure safe and optimal operation, follow these

Verify that your local voltage matches the rating plate before connecting the supplied power cord. Press START ( or 62) to begin the

Secure the heater plug by rotating it 45° until it snaps into place, and ensure the thermocouple plug is inserted with correct polarity. 2. Operating Procedures

The P100 uses a numeric keypad for selecting and editing programs.

You can customize parameters such as holding temperature ( ), temperature increase rate ( ), and holding time ( ) via the menu buttons. 3. Temperature Calibration (Silver Test)