Hxc-fw-installer.hex [4K]

For many drives, you must place a jumper on the BOOT0 pins to put the device into programming mode.

An STM32 or Artery AT32-based Gotek drive or clone. Hxc-fw-installer.hex

Tools like STM32 Dfuse or the Artery ISP Programmer are required to upload the .hex file from a PC to the drive. Flashing Procedure The installation process generally follows these steps: For many drives, you must place a jumper

Open your programming utility (e.g., Artery ISP Programmer) and select the correct port (often USB DFU ). For many drives