Deckel Fp2 | Manual

The FP2 is powered by a motor, providing 18 spindle speeds and 18 power feeds across all three axes. Specification Spindle Speeds 40 – 2000 rpm (18 steps) Feed Rates 8 – 400 mm/min (5/16 – 16 ipm) Rapid Traverse 1200 mm/min (48 ipm) X-Axis Travel 400 mm – 500 mm (depending on model) Y-Axis Travel Z-Axis Travel Spindle Taper Weight Approximately 1100 kg – 1300 kg Operational Highlights

: Power is transmitted via V-belts from the motor to the gearbox. Ensure the belts are correctly tensioned and the motor rotation is anti-clockwise as viewed from the rear to ensure the coolant pump and feedbox operate correctly. deckel fp2 manual

Because these machines are no longer in active production by the original Friedrich Deckel company, documentation and spares are sourced through specialty vendors: Deckel FP2 Parts Manual - Small | PDF - Scribd The FP2 is powered by a motor, providing

Proper care is essential to maintain the FP2's high precision. Because these machines are no longer in active