Dcunlocker Commands List Top 🎁 Limited Time

The second value indicates the (e.g., ^CARDLOCK: 1,10,0 means 10 attempts left). AT^DATALOCK? : Checks if the data lock is active. 0 = Disabled. 1 = Enabled.

: Enables or disables voice call capabilities on supported modems. dcunlocker commands list top

: Sets the device to "Auto" mode for 3G/4G selection. The second value indicates the (e

: Enables High-Speed Downlink Packet Access (HSDPA) for faster data. How to Use These Commands in DC-Unlocker 0 = Disabled

: The most critical command for checking lock status. Result 1 means the modem is locked . Result 2 means the modem is unlocked .

: A specific command used for newer Huawei models (like the E173 or E353) to reset the unlock attempt counter if it has reached zero.

AT commands 2025: Guide cellular for IoT devices - Onomondo.com