: Install control wires at least 3.5 feet (1 meter) away from televisions or radios to prevent electrical noise interference. Installation Procedures

: Use putty or a similar sealant to close the wiring lead-in hole to prevent water, dust, or insects from entering. 2. Wiring and Connections

: Connect the two-core remote controller wire to terminals P1 and P2 on the controller's PCB. These terminals are not polarity sensitive , meaning the wires can be connected in either position.

Once the hardware is installed and power is restored, the controller must be configured for its specific application. To set the current time and day:

The is a wired remote controller used to manage Daikin split systems and heat reclaim ventilation (HRV) units. Proper installation is critical to ensure safety, system performance, and a full range of functionality. Pre-Installation Safety Check

: Shut off all power supplies to the indoor and outdoor units to prevent electric shock.