Checkpoint Usb-c Console Driver Link

Once the driver is active, you must configure your terminal software (like PuTTY, Tera Term, or SecureCRT) to match the appliance's serial requirements. Serial Line COMx (Match your Device Manager) Speed (Baud) 9600 (Default) or 115200 Data Bits Stop Bits Parity Flow Control

Try a different USB cable. Some USB-C cables are "charge only" and do not carry data.

Note: Some newer Quantum Spark appliances defaults to 115200 baud. If you see "garbage" characters on your screen, try switching the speed. Troubleshooting Common Issues checkpoint usb-c console driver

Check Point devices have moved away from the traditional RJ45 serial port in favor of modern USB-C connectivity. While this simplifies the physical connection, getting your terminal emulator to talk to the hardware requires specific drivers and a bit of configuration.

Internally, these ports usually rely on a Silicon Labs CP210x or a similar UART-to-USB bridge chip. This chip is what requires a specific driver to create a "Virtual COM Port" on your machine. Where to Download the Drivers Once the driver is active, you must configure

Right-click the installer (usually CP210xVCPInstaller_x64.exe ) and select Run as Administrator .

This guide covers everything you need to know about the Check Point USB-C console driver, from installation to troubleshooting common connection issues. Why Check Point Switched to USB-C Note: Some newer Quantum Spark appliances defaults to

Older Check Point appliances relied on the DB9 or RJ45 "rollover" cables. Modern laptops, however, rarely feature these ports. By integrating a USB-C console port, Check Point allows administrators to use a standard USB-C to USB-A (or USB-C to USB-C) cable without needing a bulky serial adapter.

📌 Search for SK113113 on the Check Point Support Center. This SecureKnowledge article contains the direct download links for all supported operating systems. Step-by-Step Installation (Windows)