Once the wiring is complete, you must program the CH 1000 to "learn" your vehicle’s specific signals. Tachometer Learning
Accessory output. Powers the heater/AC and other accessories while the vehicle is running via remote start.
Brake Switch Input. This is a critical safety feature that shuts down the engine if the brake is pressed without the key in the ignition. Challenger Ch 1000 Owner Installation Manual
If you have a (chip) or a standard metal key.
While the car is running via remote start, step on the brake. The engine should shut down immediately. Once the wiring is complete, you must program
The CH 1000 allows for various customizable features, such as:
Starter output. Connects to the vehicle’s starter wire; this is the wire that only shows 12V when the key is in the "start" position. Brake Switch Input
Multimeter (avoid test lights), wire strippers, soldering iron, heat shrink tubing, and electrical tape.