Check hardware regularly. Every few months, ensure the bolts haven't loosened due to the crib's natural movement or the baby jumping.Avoid aftermarket parts. Use only the hardware provided by Bonavita. Substituting hardware store bolts can lead to stripped threads or structural failure.Mattress size. Only use a standard full-size crib mattress. A mattress that is too small creates a suffocation gap.Stop use. Discontinue using the crib once your child reaches 35 inches in height or can climb out.
Toddler Bed: Remove one side rail and install the Bonavita Toddler Guard Rail (sold separately).Daybed: Simply remove the toddler guard rail or the front side rail while keeping the mattress at its lowest setting.Full-Size Bed: The headboard and footboard can be attached to a standard metal bolt-on bed frame using conversion rails. Safety Warnings and Maintenance
Step 4: Final Safety CheckGive the crib a firm shake. There should be no wobbling or rattling. Check that there are no gaps wider than two fingers between the mattress and the crib sides. Conversion Options
Step 2: Connect the FootboardRepeat the process for the footboard. Align the side rails with the footboard posts, insert the hardware, and tighten. Once all four corners are connected, go back and tighten all bolts firmly.
The Hudson II is designed to evolve. To convert the crib into its later stages, you will typically need additional parts:
Step 1: Attach the Side Rails to the HeadboardAlign the side rails with the pre-drilled holes on the headboard posts. Insert the wood dowels first to help with alignment. Use the provided bolts and the Allen wrench to secure the rails. Tighten them until they are snug, but do not fully torque them down yet; leaving a little "wiggle room" makes attaching the footboard easier.
Are you or converting it to a toddler bed?
Clear the space. Assemble the crib in the room where it will stay to avoid trying to move a fully built crib through narrow doorways.Protect your floors. Lay down a blanket or the shipping cardboard to prevent scratching the finish of the wood.Inventory check. Open all boxes and lay out the components. You should have a headboard, a footboard, two side rails, a mattress support frame, and a hardware kit containing bolts, wood dowels, and an Allen wrench.Inspect for damage. Check every wooden piece for cracks or splinters. If a part is damaged, do not attempt to "rig" it. Contact the manufacturer for a replacement. Step-by-Step Assembly Instructions
What is the on the sticker (usually found on the bottom rail)?
If you have lost your original paper manual, look for the white envelope taped to the mattress support frame; many manufacturers include a permanent copy there for future owners. To help you find exactly what you need, could you tell me: Do you have the , or are you missing pieces?