Autocraft Battery Charger Ac-60cr Manual Link

Automatically adjusts the charging rate to prevent overcharging and extend battery life.

Use a wire brush to remove corrosion from the battery posts. Connect Clamps: Connect the Red (+) clamp to the positive battery post.

Set the voltage switch (6V or 12V) and the charge rate (2A or 6A) based on your battery type. autocraft battery charger ac-60cr manual

Once the battery is fully charged (often indicated by a green LED or a meter needle dropping to zero), unplug the AC cord first, then remove the chassis clamp, and finally the positive clamp. Essential Safety Warnings YouTube·Homeowner Repair How To Use A Battery Charger On Your Vehicle

Supports both 6V and 12V lead-acid batteries. Set the voltage switch (6V or 12V) and

Turn off all vehicle accessories and keep the hood open for ventilation.

Typically offers a 6-amp fast charge for standard automotive batteries and a 2-amp slow (trickle) charge for smaller batteries or maintenance. Turn off all vehicle accessories and keep the

Connect the charger’s AC power cord to a grounded 120V outlet.

Features built-in safeguards against short circuits, overcharging, and reverse polarity (protecting the unit if clamps are accidentally swapped). Operating Instructions: Step-by-Step Follow these steps to ensure a safe and effective charge:

The AC-60CR is engineered for versatility with several core functions: