The Hypersonic Pro features a real-time display that provides essential feedback:
Connect the motorized floor head to the bottom of the wand.
The Hypersonic Pro uses a multi-stage HEPA system. Twist the top of the dust cup to remove the HEPA filter. Pull out the stainless steel pre-filter. Wash both under cold water. airbot hypersonic pro manual
Allow filters to air dry for at least 24 hours before reinserting. Using wet filters can damage the motor.
Hair and fibers can wrap around the motorized roller. Flip the floor head over, use the quick-release lever to remove the brush bar, and use a pair of scissors to cut away any tangles. Troubleshooting Common Issues The Hypersonic Pro features a real-time display that
Inspect the charging cable for damage. Ensure the battery is fully clicked into the handle.
This is usually caused by a full dust cup or a dirty HEPA filter. Check that the seals are properly aligned. Pull out the stainless steel pre-filter
The Airbot Hypersonic Pro represents a significant leap in cordless cleaning technology, combining a high-speed brushless motor with intelligent suction control. Whether you have just unboxed your device or need to troubleshoot a specific issue, this comprehensive guide serves as your unofficial manual to mastering the Hypersonic Pro. Technical Specifications 250W - 400W High-Speed Brushless DC Suction Power: Up to 27,000 Pa (27kPa) Battery: 2200mAh Lithium-ion (Removable) Runtime: 15 mins (Boost) to 50 mins (Eco) Charging Time: 4–5 hours Dust Cup Capacity: 0.6L Weight: 1.5kg (Handheld body) Unboxing and Initial Assembly To assemble your Airbot Hypersonic Pro, follow these steps:
Empty the dust cup after every cleaning session. Press the release latch to drop the bottom lid and discard debris.
Only use the original Airbot charging adapter to prevent battery degradation or fire risks.