Adn564mp4: Install

This guide covers everything from unboxing to the final software configuration. 1. Pre-Installation Checklist

Before you start tucking wires into your headliner, perform a "bench test."

Tuck this along the roofline or floor panels toward the back of the car. Using the plastic pry tool to push the wire under the weatherstripping is the easiest method. 4. Hardwiring for Parking Mode (Optional) adn564mp4 install

Connect to a fuse that always has power (e.g., Hazard lights).

You’ll need the included pry tool, microfiber cloth, and potentially some cable clips if your vehicle has large gaps. 2. Positioning the Cameras This guide covers everything from unboxing to the

The ADN564MP4 requires a high-speed MicroSD card (Class 10 or U3). Format the card within the device settings menu to ensure compatibility.

Mount this behind the rearview mirror. Ensure the lens has a clear view of the road and isn't blocked by the "dotted" ceramic frit on the windshield. Using the plastic pry tool to push the

Check that the cigarette lighter adapter is seated firmly or that your hardwire ground connection is on unpainted metal.

Mount this on the top center of the rear window. If you have a hatchback, ensure there is enough slack in the cable for the door to open fully. 3. Routing the Cables This is the part that defines a "clean" install.

Set the intervals to 3 minutes. This makes files easier to manage and download via Wi-Fi. Troubleshooting Common Issues