: For DiagBox 7.xx and newer, your adapter firmware should ideally be Version 4.3.2 (Reference "C"). Older Reference "B" adapters may only work with DiagBox 6.xx or earlier. Common Troubleshooting Support - ACTIA IME
: While official drivers support Windows 10 and 11, many older versions of Lexia 3 and PP2000 require Windows XP SP3 (32-bit) or Windows 7 (32-bit) .
: Windows should attempt to detect the device. If it fails, open Device Manager and look for a "USB-to-CAN" or "ACTIA" entry with a yellow exclamation mark. actia psa xs evolution drivers
: The ACTIA IME Support Center provides the Basic+ XS / CAT Level X driver (Version 2.9.0.8) and the Lite XS Level X driver (Version 2.9.0.0). These are compatible with Windows 8, 10, and 11 (x86/amd64).
: Once installed, the interface should appear as an "ACTIA USB Devices" or similar entry without errors. Compatibility and System Requirements : For DiagBox 7
: Right-click the device, select "Update Driver," and point the wizard to the folder where you installed DiagBox (usually C:\APP\Drivers ).
The most reliable way to obtain drivers for an original ACTIA device is through the . Depending on your specific model, you may need one of the following: : Windows should attempt to detect the device
: Always install the diagnostic software (e.g., DiagBox) before plugging in the hardware. Most modern versions include the necessary drivers in the installation package. Connect Hardware : Plug the ACTIA PSA XS Evolution into your computer’s USB port.
: Specifically for DiagBox users, a separate "PSA VCI Driver" is often required to ensure the VCI (Vehicle Communication Interface) is recognized by the VCI Manager within the diagnostic suite. How to Install the Drivers
The is a professional-grade diagnostic interface used primarily for Peugeot and Citroën vehicles. To ensure the hardware communicates correctly with software like DiagBox, Lexia 3, or PP2000, installing the correct drivers is the most critical step. Official Driver Sources