All games are copyright © their respective authors.
If the motherboard was moved to a non-HP case, the new front panel connector may lack the "sense" pin HP requires.
You may need an adapter specifically designed for HP proprietary headers or to manually jump the "presence" pins on the motherboard header. 3. Disable the Error in BIOS 917-front audio not connected
The onboard audio is enabled, but the system isn't seeing the physical I/O. Step-by-Step Solutions 1. Reseat the Internal Connection If the motherboard was moved to a non-HP
Sometimes the BIOS "hangs" on a hardware state that no longer exists. Locate the CMOS button (usually yellow) on the motherboard. Hold it for 5–10 seconds with the power off. Restart the system to see if the hardware is re-detected. Disable the Error in BIOS The onboard audio
Note: Some HP models do not allow you to disable this specific error check; in those cases, a physical jumper is required. 4. Clear the CMOS
The error is triggered by a continuity check performed by the motherboard. If the circuit isn't completed, the BIOS assumes the hardware is missing or broken.